hpprintertechsupport's blog

HP Printers are highly efficient devices which provide the users with best in class print outputs. They have always ensured that the users get the best quality results while using HP printers. There are multiple models available for the users to select from depending upon their needs. HP provides the users with printers which best suit official needs and even printers which are ideal for house use. Even though they are highly renowned all over the world, there are certain malfunctions which the users face while using HP LaserJet printers. One such issue is when the users come across ‘Scanner Error 22.’ This is an error where the users would receive an error message displayed on their printer control panel while they are trying to scan from the printer. This error is generally caused due to extra weight or even when pressure is applied to the scanner glass during the time of scanning. The users can easily connect with HP Printer Customer Support Number and avail assistance regarding the issue.

Ways to solve HP LaserJet Pro Scanner Error 22

If you wish to solve the scanner error 22 which you have encountered on your HP LaserJet Pro, then the steps that you would have to follow are as given below:

Step 1: Power on the printer

·        The user would have to connect with the printer to a reliable power source and turn on the printer.

Step 2:  Check whether the printer is in idle state

·        The user would have to wait to find out whether their printer is in idle state or silent.

·        The user can simply disconnect the power cord from the rear side of the printer in a state like this.

Step 3: Unplug the printer

·        The user would have to unplug the printer from the power source and let the printer rest for at least 60 seconds.

Step 4: Plug the printer back to the power source

·        Now the user would have to reconnect to the power source. Generally, the printer would automatically turn on if this not happen, the users would have to turn on the system manually.

Step 5: Warm up Phase

·        The user would then see that the printer is going through a warm-up phase where the printer lights would be flashing, and the carriage may move.

·        The users are suggested to wait until the warm-up period completes its task. The printer would be in idle mode or silent mode before the users can start using it.

Why connect with HP LaserJet Customer Support?

When the user comes across issues like Scanner error 22 while working on HP LaserJet Pro, there is nothing that they would have to worry about. In such a situation, the users have the option of connecting with HP printer support Number. This service is available throughout the day and is completely free of cost. The executives would then ensure that the users attain complete satisfaction against the issue that they are facing.

Read more: HP printer support Number

Source URL:  Fix HP LaserJet Pro Printers Scanner Error 22

Imagine your disappointment when you are at work, trying to take a print out of an important report, but the HP Printer you are using keeps printing double vision. From outdated printer firmware to defective ink cartridges, there could be several reasons why this error occurred on your HP Printer. Printing errors, like the HP Printer printing double vision, can be quite frustrating because they can halt your printing tasks and affect your productivity. If these errors occur, you should call the HP Printer Customer Support Number and consult a trained printer expert to identify the root cause of the problem and find out how to resolve it. You can also go through the solutions mentioned below and try and fix the double vision error on your own.

·        Solution 1. Check your HP Printer Settings: The print settings on your HP Printer play a key role in making sure the printer functions efficiently. You can use the HP solution center software application to make changes to your HP Printer settings. Open the print settings and check if the print size, the print resolution, color, and other specifications are compatible with the paper dimensions you are using.

·        Solution 2. Update the HP Printer firmware: HP will often update the printer firmware to include product enhancements or to fix bugs in the previous versions of the firmware. You should visit the HP Customer Support: Software and Driver Downloads page to update the firmware to make sure you are using the latest version. 

·        Solution 3. Recalibrate the print-head: All HP Printers have a calibration function that helps to make sure the cartridge ink falls in the correct place on the printing paper. It is possible that the double vision printing error occurred because the print head is not calibrated properly. Go to the toolbar on your HP printer software and use the calibration to align the text and then print a sample page to see if the error is resolved.

·        Solution 4: Replace the ink cartridges: If you find that the double vision printing error persists even after you recalibrate the print-head and paper advance, you should consider replacing the ink cartridges on your printer. HP recommends all users to utilize genuine HP ink cartridges for the printer since it is not possible to attest the quality of non-HP cartridges.

·        Solution 5: Reset the HP Printer: Another solution to fix the double vision error on your HP Printer is to reset the printer and restore the factory set-defaults. Resetting the HP Printer will restore the settings to the factory default, however, it will not affect the page count or the language settings of the printer.

If you have any questions about the solutions mentioned above, or if you find that the double vision printing error persists even after implementing the solutions you can call the HP Printer Technical Support and ask for additional technical assistance. Experienced HP technicians are available 24 hours a day and will be able to give you the best solution to resolve any error you may encounter while using your HP Printer.

Read more: HP printer support Number

Source URL: HP Printer printing double vision

If you wish to set up your HP Printer on Google cloud print, then you must also understand the benefits of this aspect. There are several added benefits that you would attain after having set up the could print option. You can then change your e-documents into paper form without many efforts. You would also have the option of storing the important data which is on your system on this platform. With the help of this option, you would be able to attain more from your printer device. The users can also connect with HP Printer Tech Support Number, to learn more about this feature.

Ways to set up your HP printer with the Google Cloud Print

The steps that the users would have to undertake to set up your HP printer with the Google Cloud print is as follows:

•You would have to make sure that your system is connected with a properly functioning network. 

•Once you have examined the network connection, you would have to open your browser. It is suggested that users use Google Chrome for this process.

•After you have open the browser, you would now have to log in to your Gmail ID using your account credentials.

•Further, you would have to access the settings option on your browser. You would be able to find this option in the menu section of your browser.

•If you already have the HP printer connected with your system, then this settings option would help you locate your HP printer.

•Once you are done with all the above-given steps, you would need to login to your Google print button.

•After you have done this, you would get a lot of options on the screen. From the given options you would have to select the option of ‘Add Printer.’ 

•Having selected this option would aid you in developing a connection between your Google account and the Google print service.

•Now you would have to choose the option of managing your printer; the users can find this option in the menu that is available above.

•You would then be able to find all the printers that you have connected in this give list.

•Further, access the Google Print page and add a cloud-ready printer to your system. To add a cloud-ready printer, you would need to select the option of the same name that is available on the menu on your system screen.

•Finally, you would have to enter the name of the manufacturer of your printer, and then you select HP from the options which you would receive.

Following the given steps would enable you to set up Google Cloud Print on your HP Printer. If you face any issue while undertaking the above-given steps, then you would have to connect with HP Printer Customer Care promptly, the professionals there would efficiently guide you through the entire process in detail. This service is available on a 24-hour basis and is completely free of cost.

Read more:  HP printer Phone Number

Source URL: How to set up Google Cloud Print on HP Printers