There is a chip that is present in every HP color cartridge which works primarily for communicating with the printer. It is because of this chip that it becomes necessary that you reset the cartridges after refilling or replacing them. This chip helps in indicating the message of low in the cartridges. It has been seen that the error message of low ink would be displayed even after replacing the cartridges and this is where it becomes crucial that you reset them. When you manually reset the ink cartridges, it would save a lot of time and money. You would also be saved from encountering the unnecessary warning of low ink. You can understand this issue ideally by going through this blog. The users also have the option of promptly connecting with HP Printer Technical Support Number to avail assistance regarding this issue.
Steps to reset HP cartridges 57, 28 and 22 are as stated below:
•After you have successfully refilled or replaced the cartridges, take a look at the bottom of the cartridge. You would be able to find six copper contact strips at the bottom.
•Make sure that you keep the cartridge in front of you in such a manner that you can see the copper strips facing you.
•Now put a piece of tape on the top of the contact in the second column.
•After you have placed the tape, put the cartridge back into the printer. If you face an error message ignore it and then print a test page.
•Now remove the cartridge from the printer and keep the tape on it. Further place another tape on the top of the contact which is in the sixth row.
•You would now again have to place the cartridge in the printer and print a test page ignoring the error message.
•Finally, remove the cartridge again and take off all the tape that you had put on the contacts.
•Now when you replace the cartridge in the printer, you would be able to see that the ink level is displayed as full.
Opt for cycling the Cartridges
•You can take up this option if the first option does not work for you. In this process, you would require extra color cartridges.
•Now place the refilled cartridge in the printer while ignoring the error message that is being displayed.
•Take the refilled cartridge out and then replace it with the spare cartridge. Ignore the error message that you would receive and choose to print an alignment page.
•Once you are done with this step, remove the second cartridge and replace it with the other spare cartridge that you have.
•Again opt to print an alignment page.
•Once you have done all the said steps, remove and replace all the spare cartridges with the refilled cartridges. After you have done this step, you would be able to see that your ink levels are now shown to be full.
If you feel you would require more assistance while putting these steps into action, then you can choose to connect with the HP printer Phone Number. They would provide you with all the required assistance in this aspect.
Read more: HP Printer Customer Care
Source URL: How to reset an HP color Cartridge
HP Printers are known all over the world for their speed and reliability. HP strives to develop innovative, user-friendly features to give its customers a hassle-free printing experience. HP ePrint is one such feature that is designed to allow users to efficiently manage their printing tasks. HP ePrint is a unique service that uses cloud-based technology and enables you to give print commands through an internet connection. Thanks to the ePrint technology, HP Printer users can simply email the document or image directly to their HP Printer. The technology is compatible with almost all devices, including smartphone, laptops, and tablets. You can call the HP Printer Tech Support Number and consult a certified expert to check if your printer is enabled with HP ePrint technology.
Although the e-Print service is
meant to make printing more manageable, it can sometimes be an obstacle to
printing, especially if you do not know how to use it. This article will give
you an overview of how you can remove the ePrint option from your device in
case it gets in the way of your work.
Step
to Uninstall HP ePrint on Windows
Even though HP ePrint is designed to provide mobile printing
capabilities, not everyone is comfortable using the technology. If you find
that HP ePrint begins to interfere with the way you use your printer you can
follow the steps given below to uninstall HP ePrint from your Windows device:
·
Step 1:
Switch on your Windows computer and log in as admin
·
Step 2:
Open the Control Panel and go ‘Devices and Printer.’
·
Step 3:
Review all the options and check is ‘HP ePrint’ is listed
·
Step 4:
If you find the ‘HP ePrint’ option right-click and press ‘Delete.’
·
Step 5:
Open the run tab and type ‘printui.exe /s’ in the given box
·
Step 6: Select the
Printer Drivers tab and look for ‘HP ePrint.’
·
Step 7:
Right-click it and press the ‘Remove’ button
·
Step 8:
Open the Print Server Properties Window
·
Step 9:
Press ‘Apply and Ok’ then close the Devices and Printer Window
After you exit the Devices and Printer Window, you can reboot your Windows computer and check if the HP ePrint software is uninstalled. If you have any difficulty uninstalling the software, you can call the HP Printer Customer Care and speak to a certified printer expert to identify the cause of the problem. HP experts are available 24 hours a day and will be able to give you the best solution to overcome any error related to your HP Printer. No matter what issues you may face with your HP Printer you can be sure that a team of experts stand ready to give you a step-by-step guide to fix those issues so that you can carry on with your work.
Read more:
HP Printer Service Error Code 49 is an error message that generally appears on the control panel of Page Wide Enterprise printer or LaserJet Enterprise Printer that has HP Future Smart firmware. Error Code 49 shows that there is a firmware communication error. This error is sometimes accompanied by a letter such as W, X, Y, and Z. For example, HP users are likely to see the error as “49.WX.YZ.” These letters are considered to be variable values of the error. Service Error Code 49 is of two types, either Intermittent 49 errors or Persistent 49 errors. You can call the HP Printer Customer Care Number to find out more about this error, or you can read through the solutions given below to try and troubleshoot the problem on your own.
Causes
of HP Printer Service Error Code 49
Even though HP painstakingly tests the printer
firmware even before it is released, users will sometimes encounter errors that
can halt printing tasks. Intermittent 49 errors are seen when the printer
alternate between correct functioning and not functioning at all. On the other
hand, Persistent 49 errors, as the name suggests, repeatedly occur even after
many attempts to solve the problem. Here are some of the reasons why you may have
encountered the problem in the first place:
• The printing files on your computer include
unsupported printer commands
• Heavy network traffic or concurrent processing of
jobs caused the HP Printer to malfunction
• You may have implemented a third-party solution
that was not designed to work on your HP Printer
Steps to fix HP Printer Service Error Code 49
You can refer to the steps given below to check the
setting on your HP Printer and make the necessary changes to fix Error Code 49:
Step 1: Begin by turning the HP Printer off and then
turn it back on
Step 2: Check the event log to see how often the
error occurs
Step 3: Use the control panel or the Embedded Web
Server and enable Auto Recovery
Step 4: If Auto Recovery is not enabled by default
you will need to open the ‘Future Smart 3’ menu and select ‘Management.’
Step 5: In the same way open the ‘Future Smart 4’
menu and go to ‘General Settings.’
Step 6: Select the Auto Recovery option and enable
it. Save the changes and then restart your printer.
As long as the frequency of the error is limited to one-time per week, you do not have to worry about anything since the errors will not harm your HP printer. However, if the errors occur often and if they persist even after implementing the steps mentioned in this article, then you should call the HP Printer Tech Support and ask for additional technical assistance so that you can perform more advanced troubleshooting steps.
Read more:
Source URL: Steps for Troubleshooting HP
Printer Service Error Code 49