Brother Printers are among the most preferred printer manufacturers present in the market. These printers provide the users with all the required assistance in their day to day functioning. One issue which the users come up is when they are unable to connect their Brother HL-2270DW printer to the Wi-Fi. When faced with such an issue, the users can use the automatic wireless mode such as AOSS or the Wi-Fi protected setup configuration for your Brother printer. The users can learn more about this by going through this entire blog. The users can also avail assistance from trained professionals by connecting with Brother Printer customer service number.
Ways to connect Brother Printer
HL-2270DW to Wi-Fi using the Wireless setup?
The users can easily follow the
below-given steps to connect their HL-2270DW Brother printer with W-Fi:
·
While trying to set up the Wi-Fi, simply
ensure that the printer is close to the router or the access point.
·
Then the users need to plug the power cord
in and switch the device on.
·
Further look for AOSS or WPS button and
then press it down for a few seconds.
·
Now reach out to the back of the printer
device and press the wireless setup button for about 2 seconds. The users must
ensure that they do not press it for more than 3 seconds.
·
When you do so, the PIN method for the
Wi-Fi Protected Setup mode would change.
·
You would also have to wait for another 5
minutes for this mode to clear.
·
You might also have to turn off the
printer completely and initiate the process all over again.
Before Configuring the Brother
Printer
There are various points that you
require to confirm before configuring and installing the Brother HL-2270DW
printer. These points are as stated below:
·
Initially check if the router or access
point supports the AOSS or WPS.
·
Also keep all the initial requirements for
installation-ready such as SSID, Passkey, Network Name. You should also be able
to visualize this when you turn the router towards its side.
·
The users must also check the
documentation associated with the WLAN Router.
·
It is vital that the users ensure that
there is no interference to the functions of the WLAN Access Point or Router.
·
If you have also configured multiple SSIDs
to your LAN, then each of these would use different encryption and
authentication methods.
·
It is crucial that the system and the
Brother printer have the same network which would ensure smooth communication
and setup.
If the users wish to attain more information to connect their Brother printer to the Wi-Fi, then they can promptly connect with Brother Printer technical support number. This service functions all around the clock and is accessible throughout the day using a toll-free number. Using this toll-free number, the users can easily connect with trained professionals who are capable are solving all the issues which the users might come across.
Source URL: Connect Brother HL-2270DW
Printer to Wi-Fi
Brother printer is considered to be one of the most
reliable printers available in the market. It has been serving users with some
impressive features and has always ensured customer’s satisfaction. The duplex
feature in printers allows you to take printouts on both sides of a sheet
automatically. It reduces your printing cost to some extent. But at times it
happens that your brother printer does not allow duplex printing, which affects
your budget again. Once you go through this article, you will get to know the
reasons behind this error and some troubleshooting steps have also been
provided to make it easy for you to overcome this problem. By following this
article, you will be able to fix this problem, and duplex printing will be
enabled again. You can also connect with experts at Brother Printer
phone number to
avail assistance from the technical experts who provide you with a detailed and
step by step solution to your problem.
Probable
causes of Brother printer duplex not working:
If you are stressed because your brother printer
duplex feature is not working, you just have to relax because once you get to
know the reasons for this problem, the issue will be quickly resolved. Have a
look at some of the main causes of this error:
ØSome
users are encountering this issue on their Macbook pros and not anywhere else.
So the problem must be with your Mac driver
ØIncompatibility
between the printer driver and the operating system you are using can also
cause this error
ØIf
you have done a recent update, it can prevent duplex printout
ØIt
can also occur when you have installed a third-party print service along with
Brother printer software on your PC.
ØIf
you have a corrupt folder on your PC, it can also cause this error.
Methods
to fix Duplex printing problem in Brother printer
If your Brother printer’s duplex feature is not
working, you can go through the steps provided below:
ØMake sure that the Duplex feature
is installed in your printer: If you want to get
dual-sided printouts from your printing machine, you will have to verify if the
duplex printing option is enabled or not.
ØEnsure that you are using an
updated version of Brother printer driver: The setup of
the printer driver is crucial to print both front and back of the pages. Your
device will stop this if you are using outdated software. You need to download
and install the latest software to activate the duplex feature.
ØYou also need to check the Page
setup and Paper settings in the printer:There are some minor
details every customer should check, such as the paper type and page setup
settings. You can do it by visiting the ‘Printer Settings’ option.
These are the few solutions which can fix your issue
very soon. But if you face any trouble incorporating these steps, you can get
in touch with Brother Printer
technical support number and ask the technical masters to assist you properly. You will be provided with
the best possible solution in absolutely no time.
Source URL: Brother Printer Duplex Not Working