Brother Printers are among the most preferred printer manufacturers present in the market. These printers provide the users with all the required assistance in their day to day functioning. One issue which the users come up is when they are unable to connect their Brother HL-2270DW printer to the Wi-Fi. When faced with such an issue, the users can use the automatic wireless mode such as AOSS or the Wi-Fi protected setup configuration for your Brother printer. The users can learn more about this by going through this entire blog. The users can also avail assistance from trained professionals by connecting with Brother Printer customer service number.
Ways to connect Brother Printer
HL-2270DW to Wi-Fi using the Wireless setup?
The users can easily follow the
below-given steps to connect their HL-2270DW Brother printer with W-Fi:
·
While trying to set up the Wi-Fi, simply
ensure that the printer is close to the router or the access point.
·
Then the users need to plug the power cord
in and switch the device on.
·
Further look for AOSS or WPS button and
then press it down for a few seconds.
·
Now reach out to the back of the printer
device and press the wireless setup button for about 2 seconds. The users must
ensure that they do not press it for more than 3 seconds.
·
When you do so, the PIN method for the
Wi-Fi Protected Setup mode would change.
·
You would also have to wait for another 5
minutes for this mode to clear.
·
You might also have to turn off the
printer completely and initiate the process all over again.
Before Configuring the Brother
Printer
There are various points that you
require to confirm before configuring and installing the Brother HL-2270DW
printer. These points are as stated below:
·
Initially check if the router or access
point supports the AOSS or WPS.
·
Also keep all the initial requirements for
installation-ready such as SSID, Passkey, Network Name. You should also be able
to visualize this when you turn the router towards its side.
·
The users must also check the
documentation associated with the WLAN Router.
·
It is vital that the users ensure that
there is no interference to the functions of the WLAN Access Point or Router.
·
If you have also configured multiple SSIDs
to your LAN, then each of these would use different encryption and
authentication methods.
·
It is crucial that the system and the
Brother printer have the same network which would ensure smooth communication
and setup.
If the users wish to attain more information to connect their Brother printer to the Wi-Fi, then they can promptly connect with Brother Printer technical support number. This service functions all around the clock and is accessible throughout the day using a toll-free number. Using this toll-free number, the users can easily connect with trained professionals who are capable are solving all the issues which the users might come across.
Source URL: Connect Brother HL-2270DW
Printer to Wi-Fi
The Wall