When it comes to Brother printer, it becomes imperative that
you clean the paper pick up roller occasionally to avoid any malfunctions or
troubles. This will ensure that you do not face paper jam troubles in the
future. If the pick-up rollers are correctly cleaned, then you can be rest
assured that the papers will get feeded into the tray correctly and when the
print command is given, it will come smoothly without getting stuck. You can
read this blog until the end and understand the cleaning procedure. Sometimes
it can also require a technical expert to help you with the same, and if you
wish to avail that, you can always dial Brother
Printer tech support. You must also get it serviced annually in order to avoid
troubles in the future.
The
process to clean the Brother Printer Pick up roller:
·
Switch off the Brother printer and remove the power cord from the main
switch
·
If the paper flap, where you insert the papers is open, you need to
close it and also close the paper support.
·
Now pull out the paper tray from the machine
·
Take a moist linen cloth and
damp it with water and clean the Base Pad 1.
·
If you have the printer with model number
MFC-J680DW/MFC-J880DWMFC-J885DW, then you need to clean the Base Pad 2 as well.This
is the photo bypass tray and wipes it with the same linen cloth.
·
After cleaning it, take a dry cloth and wipe it on the base pad to soak
the moisture
·
Now again take a moist cloth and start rotating the paper pick up roller
and clean it with the fabric. Make sure that no point gets missed
·
After it is cleaned, remove all the moisture with the dry cloth.
·
Now insert the paper tray back and fix it securely.
·
Connect the power cord back again.
·
Switch on the printer and see whether the issue has been resolved or
not.
This can be a complicated procedure, especially for those who
have no technical knowledge about the printer’s equipment. Instead of
implementing the given method in a faulty manner, it is suggested that you take
help from the professional executives by dialing the toll-free number at Brother Printer customer care
number. Doing this without additional help, especially
when you are not technically sound can lead to future issues and can worsen the
situation.
It is suggested that you take help from the professional
executives by dialing the toll-free number at Brother Printer Customer Support
number.
brother printer support number, brother printer customer care
number, brother printer technical support number, brother printer tech support
number, brother printer customer support number.
Source URL:
1-866-429-4641 Clean Brother Printer Paper Pick-up Roller
Brother printer is a highly extensive printing device
which is available in the market. They provide the users with the best printing
services, which is accompanied by top quality fax and scan features. Even when
the users attain optimum facilities while using Brother printer, there are
certain issues which also come up. Malfunctioning is a common scenario which
most of the electronic devices come across. One such issue is the error code 30
which is often seen on Brother Printer. The users can understand more in detail
about this issue by going through this blog. These users also have the
alternative option of connecting with Brother Printer support phone number to avail professional
assistance regarding the same issue.
Reasons which cause
Brother Printer Error Code 30
Some of the most common reasons for facing the error
code 30 on your Brother Printer is as given below:
·
When the printer head carriage has failed to come back to its
home position, which is to the far right of the unit.
·
When the mechanisms located on both sides of the carriage are
out of place.
·
When the cartridge cover is not locked accurately in their
place.
Ways to fix Brother
Printer Error Code 30
If you wish to solve the issue of Brother Printer
Error Code 30, then you would have to take up some simple steps which would
help you solve the issue easily. The steps that you would have to undertake are
as given below:
Procedure 1:
·
You would have to open the cover of the printer using the
tabs which are given on the printer. Buttons can be found on the left and right
side of the machine.
·
Now you would have to shift the print head to the center of
the machine.
·
You would now have to check and confirm that no piece of
paper, staple or paper clip is found inside the machine.
Procedure 2:
·
The user would now have to hold the scanner cover by using
the tabs of the cover of the printer. It is placed on the left and right-hand
side of the printer.
·
Now slide the print head over to the right side under the
cover to confirm that you have cleaned the whole encoder strip of the machine.
·
Further by using a lint-free cloth, you would have to tightly
confine the encoder strip on both sides and scour the cloth down the strip from
one end to the other, a minimum three times.
Procedure 3:
·
The users would have to check the position of the encoder
strip and find whether it is accurately placed or not.
·
If you find any discrepancy, open the printer and then
reinsert the strip again.
·
Finally, it is advised that you reset your printer and then
take a text print to analyze the quality of the print.
If you find that you are unable to solve this issue
using the above-given steps, then it is advised that you promptly get connected
with Brother Printer customer support phone number.This service can be
accessed throughout the day and is completely free of charge.
Source URL: How to Solve The Brother Printer Error Code 30
Brother Printer Error code 71 is displayed
as ‘Print Unable 71’ on the printer display screen and is associated with the mechanical
malfunction of the printer. This error code is related to the laser unit
polygon motor. The polygon motor runs on the power of 20 to 40,000 RPMs. It depends
on the version of the machine that you are using. You must first understand
what the actual reason behind this error is. The polygon motor runs at its set
operating speed depending on the machine that you are using. If it is not able
to attain its acquired speed in the set amount of time, Print Unable 71 error
starts displaying on the unit. Sometimes the motor gets jammed and needs a
quick fix. This blog will help you to solve the issue if you intend to do it
manually. Rest, if you acquire remote help and technical assistance, dial Brother
Printer technical support phone number and have a word with the techies.
Manual solution to fix Brother printer error code 71
ØSwitch
off the printer and unplug it from the primary power source
ØOpen
the rear door and remove the polygon motor from the bushing
ØApply
some lubricating oil on to the motor and clean it.
ØIf
you find that the motor has wearied off, kindly replace the unit. (The best way
to judge that is when the unit becomes too noisy or gets locked)
ØOnce
done, insert back the motor and secure its place.
ØNow
connect back the printer to the system.
ØGo
to the official Brother Printer website and look for the latest firmware and
install it in the system. The printer must be working on correct settings
ØUpdate
firmware and once done, switch off the printer and after 20 seconds, switch on
the Power button again.
ØIf
you find that the date and time are appearing on display, the issue is finally
resolved.
The Brother printer can remain
powered off for up to 4 days and still it won’t lose the faxes in the memory.
But if the error message keeps on popping, again and again, it is suggested
that you transfer the faxes to another fax machine. Make sure that the user
settings are appropriately configured. If by chance, this error keeps on
reoccurring, it is advised that you consult the technicians at Brother Printer support number. They will help you to resolve the
error. The number remains in service 24*7 and is toll-free.
Source URL:
Resolve Brother Printer error code 71