部落格

Brother Printers are among the most preferred printer manufacturers present in the market. These printers provide the users with all the required assistance in their day to day functioning. One issue which the users come up is when they are unable to connect their Brother HL-2270DW printer to the Wi-Fi. When faced with such an issue, the users can use the automatic wireless mode such as AOSS or the Wi-Fi protected setup configuration for your Brother printer. The users can learn more about this by going through this entire blog. The users can also avail assistance from trained professionals by connecting with Brother Printer customer service number. 

Ways to connect Brother Printer HL-2270DW to Wi-Fi using the Wireless setup?

The users can easily follow the below-given steps to connect their HL-2270DW Brother printer with W-Fi:

·        While trying to set up the Wi-Fi, simply ensure that the printer is close to the router or the access point.

·        Then the users need to plug the power cord in and switch the device on.

·        Further look for AOSS or WPS button and then press it down for a few seconds.

·        Now reach out to the back of the printer device and press the wireless setup button for about 2 seconds. The users must ensure that they do not press it for more than 3 seconds.

·        When you do so, the PIN method for the Wi-Fi Protected Setup mode would change.

·        You would also have to wait for another 5 minutes for this mode to clear.

·        You might also have to turn off the printer completely and initiate the process all over again.

Before Configuring the Brother Printer

There are various points that you require to confirm before configuring and installing the Brother HL-2270DW printer. These points are as stated below:

·        Initially check if the router or access point supports the AOSS or WPS.

·        Also keep all the initial requirements for installation-ready such as SSID, Passkey, Network Name. You should also be able to visualize this when you turn the router towards its side.

·        The users must also check the documentation associated with the WLAN Router.

·        It is vital that the users ensure that there is no interference to the functions of the WLAN Access Point or Router.

·        If you have also configured multiple SSIDs to your LAN, then each of these would use different encryption and authentication methods.

·        It is crucial that the system and the Brother printer have the same network which would ensure smooth communication and setup.

If the users wish to attain more information to connect their Brother printer to the Wi-Fi, then they can promptly connect with Brother Printer technical support number. This service functions all around the clock and is accessible throughout the day using a toll-free number. Using this toll-free number, the users can easily connect with trained professionals who are capable are solving all the issues which the users might come across.

Source URL: Connect Brother HL-2270DW Printer to Wi-Fi

The users of Brother Printers come across the error code 48 when there is some issue with the printer head cable. The users encounter this issue when the encoder strip is untidy. When the printer faces this issue, the user will come across numerous errors. This would mean that you would have to solve the issue at the earliest to get back to the smooth functioning of the printer. The users can get a clear understanding of this issue by having a look through this blog. The users would also have the option of connecting with Brother Printer  customer service number.

This is an issue which the users can come across at any time while using Brother Printers. Some error codes that you would face when you have this issue on your printer is as given below:

·        Brother Printer Unable to Print 8f

·        Unable to scan

·        Brother Printer unable to clean and many other printer functionality issues

Effective ways to solve the issue of error code 48

This is one of the most common issue that the users come across while using Brother Printers. The users can effectively solve this issue by undertaking the below-given steps:

Solution 1: Check for Brother Printer Paper Jam or Paper Scraps

·        Firstly, you would have to disconnect your printer from the power source and the computer system.

·        Then you would have to remove the scanner cover and have a look inside the machine.

·        Further examine whether there is paper jammed inside the device, also ensure that there no debris collected inside the printer device.

·        You would have to make sure that the paper is not blocking the print head. Tilt your printer left and right to check whether there is any kind of debris inside.

·        If you find that the printer head is to the left side, manually move it to the middle. Clear the encode strip and close the scanner cover and reconnect the power cord.

·        If the printer head is found to be towards the right, reconnect the power cord. When the LCD displays the ‘Cover is open’ message, press and hold the Exit button for 5 seconds. When you see that the print head has moved back to the middle, remove the power cord.

Solution 2: Manually clean the Encoder Strip

·        Start by removing all the power cables from the printer.

·        Now, remove the Scanner cover and then look for the Encoder strip of your printer.

·        You would now have to use a dry lint cloth to clean out both sides of the Encoder strip.

·        Once you are done cleaning the Encoder strip, close the scanner cover.

·        You can now reconnect all the power cables back to the printer device and then check whether the error has been solved.

These are the most effective steps that the users can use to solve the Brother Printer Error Code 48. If you face any difficulty in enacting the given steps, you can then connect with Brother Printer  technical support number to avail professional assistance.

Source URL: Troubleshoot Brother Printer Error Code 48

Brother can be regarded as one of the most famous manufactures when it comes to the making of technical products such as printers, laptops, and computers. The printer models stay in high demand. You must be familiar with the fact that now a range of wireless printers are coming in the market which has made the lives of the users quite easily. They don’t need to connect the printer to the device with the help of the USB cable in order to print. But can give commands directly from their computer, laptop or even via their smartphone for the printer to print when a Wi-Fi connection has been established. This blog will help you to connect the Brother printer to your available Wi-Fi by shooting with some basic steps. But to do so, you are first required to connect the printer to any local network and firstly install the printer drivers. If they are already installed, then you must update them, if it is required. You can also get directly in touch with the technical support from Brother Printer  customer support

 and do as they guide you. Take a look at this blog and proceed further.

What are the requirements that are needed for the connection?

FFirst of all, you need to have the network name and the password of the wireless network.

FSecondly, the printer and the computer should be switched on.

FAnd lastly, you need to restart the Wi-Fi router once again before you begin the setup process.

Once they are done, you can move to the steps of connecting the printer to the Wi-Fi connection.

What are the steps that are required to connect the Brother printer to the Wi-Fi?

FDouble click on the menu button and then move down to Network.

FOnce done, select ok and choose the WLAN option

FAfter that select the setup wizard.

FNow press okay and begin the device search process.

FOnce the device has been located, select the Wi-Fi network. If it asks you to use WPS, then select “No”

FProvide the Wi-Fi password and tap OK

FApply the settings by confirming.

FAfter that, if the password is correct, the connection will be automatically established.

The setup process for Brother Printers is quite easy and can be achieved in a few easy steps. You just need to know the password and the network name. But if you find, that even after the successful setup, the printer is unable to print, then you need to catch up with the Brother Printer  customer service for further assistance.

Source URL: Brother Printer  support

Brother printers are one of the most sophisticated printers devices that offers complete satisfaction to the users and perform pretty well all taking care of the needs of users. Every time the company launches some new great features to make the printing task easier than earlier. However it is widely accepted fact that brother printer is working quite superbly but it also true that no electronic device can get rid of service failure, errors, and glitches. Brother printer error ts-02 is such an error that causes great trouble. One cane easy solution to encounter this error by simply calling at Brother Printer customer support number. Meanwhile, this article will also try to solve your issue, keep reading.

What causes Brother Printer error TS-02?

Brother printers are designed for working extraordinarily but sometimes they create some troubles for users such as TS-02. Below are the reasons for error TS-02:

·        The damage in Windows system files can cause this issue

·        Some corrupted files in your system may also create this error

·        If you have not completed the installation or uninstallation of the printer software you might get frustrated by error TS-02

·        If you have not completely deleted some applications form your system this error may occur.

·        You can follow these reasons and through these points, you can find out the actual reason for your printer getting out of service.

Easy fixes of Brother Printer error TS-02:

Here you can find some solutions that have been given to you after doing some extensive research

·        Turn on your WLAN access or router.

·        Check if connected WLAN/router is working fine

·        Make sure that your printer is situated nearby the WLAN to bet the better connectivity.

·        Now “Run” the temporary location of your printer  and set it to a minimum distance of 1 meter or 3.3 feet from the WLAN access point

·        In case of WLAN access/router is getting system address filtering, then you have to make sure that your printer is allowing the system to process filter

·        You have to be more cautious in some case such as if your printer is using 4 GHz range and your system is on 5 GHz then it may cause you TS- 02 error

·        Now use the setup wizard option from your printer control panel

·        If you are aware of SSID and security data you can complete this process manually as well.

·        Now you can restart your Brother printer to check if it working fine just it was before.

Get the Brother Printer support for an expert solution:

There can be times when the issue may not get fixed due to some additional technical problem. In such cases, you need to call at Brother Printer customer support numberwithout wasting any time to get the proper solution.

Source URL: How to fix brother printer error ts-02