Netgear
is well-known for developing some of the world’s fastest wireless routers
capable of delivering strong and steady Wi-Fi signals. Apart from the
innovative router features, one of the most popular aspects of Netgear is the
fact that the routers are easy to install. However, sometimes you may find that
you do not get a wireless connection even though the Netgear router is
connected. One possible cause for this is that the router firmware is outdated.
This article will give you an overview on how to upgrade your router firmware
to restore the connection. You can also call the Netgear router tech support and speak to a certified technician to check if there
are any advanced solutions you can use to avoid the wireless connection error
in the future.
Steps to fix
Netgear Router Connected but No Wireless Internet
Whenever
you encounter an error related to your network connection, you should first
contact your internet service provider and check if there is a problem with the
signal. If the signal is ok, then it is possible the network error is caused
because of a firmware issue. Netgear occasionally releases router firmware
updates to add new features and improve product performance. You can refer to
the instructions given below to manually upgrade the router’s firmware:
·
Step
1: Visit the Netgear Download Center to download the router upgrade.
·
Step
2: Check if the file uses an
.img or .chk extension and save the file.
·
Step
3: Use a computer that is connected
to your router via an
Ethernet cable
·
Step 4: Avoid using a system that is
connected wirelessly to the router.
·
Step 5: Open a browser and visit this address
·
Step
6: Enter the username and password for your Netgear router.
·
Step
7: Go to the advanced settings and click the ‘Administration’ option.
·
Step
8: Select the Firmware Update
button and click ‘Choose File.’
·
Step 9: Look for the saved firmware on your
desktop and click ‘Open.’
·
Step 10: Upload the required file and wait for
the firmware upgrade process to be complete.
As far as possible you should never interrupt
the upload process as it could corrupt the firmware and render your Netgear
router virtually unusable. Once the firmware upgrade is complete, your Netgear
router will automatically reboot. If you find that the wireless internet
connection does not work even after upgrading the firmware, you can call the Netgear router customer care number and ask for additional technical assistance. Experienced
technicians are available 24 hours a day and will be able to give you detailed
solutions for any error you may encounter on your Netgear Router.
Read more - Netgear router support
Source URL - Fix Netgear Router Connected But No Wireless Internet
netgear
support- It could be the worst
situation when your Netgear suddenly stops working. Several attempts to connect
it get failed and you get frustrated. There are so many reasons that may be
responsible for issues and errors. There are such issues that can set your mood
off by not connecting your laptop or mobile to the internet and completely cut
you to the world. To fix your Netgear router, you can contact at netgear
router tech support number, or you can follow this
blog till the end to remove the issue.
Easy steps top fix
Netgear router:
Internet connectivity is the main issue for your worriedness, and
you should fix it at earliest using some proven and easy techniques. Follow
these steps to fix the internet connectivity issue:
Disconnect your router
and make a direct connection of a computer to the modem
●
If you are still not
able to access internet contact your internet service provider
●
If the internet is
connected, then connect the router as it was before and continue with these
steps.
Log in to
the router if you can do so skip to step 3 but if you can not log in, then
follow these instructions:
●
If your device is
connected to the router with Ethernet cable, then you need to check that the
LEDs of the ports are lit and if you find that it is not lit then you should
try to connect the cable to another port and on the back of the router.
●
In case you have a
wireless device then you need to check the adapter LED if it is lit. If you get
any problem there to follow the adapter manually.
●
If all the cables are
fixed properly and LEDs are lit, then go for these steps:
⮚
Turn your router off and
make it on again
⮚
If the problem persists,
then you should perform a factory reset.
Now if you can log in to the router, then you need to run the
router’s Smart Wizard and perform any one of these points:
If IP address or PPPoE is discovered you can proceed with step 4,
but if you can't find an IP address then you should perform these steps:
●
Turn off the router
●
Turn of the modem
●
And then make them on
again
●
Now start following from
step 2
You need to click on the
smart wizard test button and go to the Netgear online test page.
Now in the router status option, you need to perform a complete power
cycle of your network.
Get the Netgear
support for further help:
This blog has tried to consist of all the significant and easy
solutions, but you may get some specific situation and find you unable to
connect with the internet. In this situation, you should call at netgear
router customer care phone number and ask for expert support.
Read more – netgear
router toll free number
Source URL: How
do I fix my Netgear router