netgear
support- It could be the worst
situation when your Netgear suddenly stops working. Several attempts to connect
it get failed and you get frustrated. There are so many reasons that may be
responsible for issues and errors. There are such issues that can set your mood
off by not connecting your laptop or mobile to the internet and completely cut
you to the world. To fix your Netgear router, you can contact at netgear
router tech support number, or you can follow this
blog till the end to remove the issue.
Easy steps top fix
Netgear router:
Internet connectivity is the main issue for your worriedness, and
you should fix it at earliest using some proven and easy techniques. Follow
these steps to fix the internet connectivity issue:
Disconnect your router
and make a direct connection of a computer to the modem
●
If you are still not
able to access internet contact your internet service provider
●
If the internet is
connected, then connect the router as it was before and continue with these
steps.
Log in to
the router if you can do so skip to step 3 but if you can not log in, then
follow these instructions:
●
If your device is
connected to the router with Ethernet cable, then you need to check that the
LEDs of the ports are lit and if you find that it is not lit then you should
try to connect the cable to another port and on the back of the router.
●
In case you have a
wireless device then you need to check the adapter LED if it is lit. If you get
any problem there to follow the adapter manually.
●
If all the cables are
fixed properly and LEDs are lit, then go for these steps:
⮚
Turn your router off and
make it on again
⮚
If the problem persists,
then you should perform a factory reset.
Now if you can log in to the router, then you need to run the
router’s Smart Wizard and perform any one of these points:
If IP address or PPPoE is discovered you can proceed with step 4,
but if you can't find an IP address then you should perform these steps:
●
Turn off the router
●
Turn of the modem
●
And then make them on
again
●
Now start following from
step 2
You need to click on the
smart wizard test button and go to the Netgear online test page.
Now in the router status option, you need to perform a complete power
cycle of your network.
Get the Netgear
support for further help:
This blog has tried to consist of all the significant and easy
solutions, but you may get some specific situation and find you unable to
connect with the internet. In this situation, you should call at netgear
router customer care phone number and ask for expert support.
Read more – netgear
router toll free number
Source URL: How
do I fix my Netgear router
The Wall