dellcustomerservice's blog

The error code 1 2 3 is recorded to be one of the most common issues that is encountered by users while using their Dell Laptops. This is an issue where the system is unable to boot, can’t even arrive at BIOS. Then there is a definite need to run diagnose. Dell laptops are one of the most efficient laptops that are available in the market. They have been providing the users with magnificent services for several years now. Even to counter this issue of error code 123 the users can promptly connect with the dell technical support number where they would get all the assistance that would be required. The users can also try resolving this issue themselves by using the methods that are given ahead in this blog.

The possible reason for you having to encounter this error could be the power supply issue, Motherboard issue, Hard Disk or even the battery issue. If you facing this issue with your system, then there is nothing that you have to worry about. You can calmly look into the matter and solve it efficiently.

The steps to solve Dell Error Code 123

Solution 1: Review the Power Supply Button

• You should run a complete review of the power supply of the laptop. Ensure that the power cable is properly connected with the laptop and that there is no issue with the power socket that you connected with.
• If you find any issue, immediately replace the power cable or power source.

Solution 2: Initiate Dell Diagnostics from the Hard Drive

• As your system boots, when the Dell logo is displayed on the screen press the F12 key instantly.
• If you come across the message which says no diagnostic utility partition is available, then at that point you would have to run the Dell Diagnostics from your own ‘Drivers and Utilities’ media.
• Once you have the list on the screen, you would have to highlight ‘Boot to Utility Partition’ and then click on the ‘Enter’ button.
• Further, when you receive the Dell Diagnostics ‘Main Menu’ option on your screen, select the tests that you would want to run on your system.

Solution 3: Run the Dell Diagnostics from the Drivers and Utility Disk

• Add the Driver and the Utility disk, then you would have to restart your system.
• After you see the Dell logo, click on F12 immediately.
• After you receive the boot list, you would have to highlight the ‘Onboard or USB CD-ROM Drive’ and then click on the ‘Enter’ key.
• Now you would have to type 1 to begin the menu and then press ‘Enter’ to proceed.
• Further, you would have to choose ‘Run the 32 bit Dell Diagnostics’. If you have multiple versions, then choose the version that you perfectly suit your system.
• Now when the Dell Diagnostics ‘Main Menu’ appears, you would have to choose the test that you wish to run.

Solution 4: Check the RAM

• The Dell error code 123 occurs because of the RAM settings. Hence it is important that you verify the RAM settings. It could also be because the ram is not seated properly in the slot.
• You should also inspect the RAM for any bent pin or any object that is blocking the RAM. 
• Ensure that the RAM is compatible with your system.

If even after following the methods given above you are not able to solve the error code 123, then it is advised that you promptly connect with the dell customer care. They would then give you all the assistance that is required to efficiently overcome the issue.

Read More:- Dell printer Phone number

Source URL: How to fix Dell Error Code 123

The username and admin password for your Dell Printer can be found in the online user’s guide that is normally installed when the Dell Printer drivers are installed. The process to open the user’s guide may differ depending on your Dell Printer model. The user name for your printer is ‘Admin’ and never be changed. The factory default password is kept as ‘password’. You can change the factory default password on your Dell Printer using the Dell Printer Configuration Web Tool. However, you must keep in mind that you need to close and then re-open the browser window for the password change to be effective. You can call the dell customer service number if you need any assistance while using the Dell Printer Configuration Web Tool.

While changing the password for your Dell Printer you will need to know the old password. In case you do not know the old password you can refer to the steps mentioned in this article to reset the factory default password and then create a new admin password for your Dell Printer.

Steps to reset the default admin password for Dell Printer

Whenever you want to reset or recover the default admin password for your Dell printer you will need to reset the Non-volatile random-access memory or NVRAM. You can refer to the steps given below to recover the factory default password:

·  Step 1: Turn on your Dell Printer and press the menu button

·  Step 2: Use the down or up arrow buttons to locate the ‘Configure’ option

·  Step 3: Once the ‘Configure’ option is displayed, press ‘Enter’ and proceed

·  Step 4: Once again use the down or up arrow buttons to find ‘Network’

·  Step 5: Press the arrows until ‘Init NVRAM’ is displayed on the panel

·  Step 6: Click ‘Enter’ and when the display indicates “Init NVRAM Are you sure?” click ‘Enter’ once again.

The next message should read “Initializing, Initialized”. When you see the ‘Restart Printer’ message you will need to switch the AC power off for about 5 seconds and then turn it back on again.

Dell Printer users should note that resetting the NVRAM will automatically clear all the customized network settings you have saved on your printer. That is why Dell recommends taking a printout of your current printer and panel settings reports before you attempt to reset the Non-volatile random-access memory.

If you need any clarification regarding any of the steps mentioned in this article you can call the dell customer care and speak to a certified Dell expert. No matter what issues you are facing on your Dell Printer experts are available 24 hours a day to give you the best solution to resolve the issue as soon as possible.

Read More:- Dell Support

Source URL: Reset default admin password for Dell Printer

Dell printers are most trusted and supremely advanced printer devices that are meant to provide a quality printing service for all kinds of complex printing requirements. If you are using any Dell printer device, then you must be aware of the efficient services that it offers. Now you can enjoy an uninterrupted printing service for a longer time without getting any complex issue. But as all the devices are not remained from getting issue Dell printer may also cause you some trouble in some instances. Dell print spooler in Windows 10 is such an issue that needs to address earliest to continue the work process like you were doing before. If you get this issue, you can contact the dell customer support number and get the easy solution advice and methods easily although this blog will provide you some easy steps to solve this issue easily.

What cause Dell print spooler error?

Dell printers are fine products that avoid many issues to appear and save you time. But there could be some specific reasons that can lead you into trouble. If you get printer spooler error message, then you have to find the exact reason behind the issue. So check these points mentioned below to know the reasons:

• Drivers malfunction may cause this issue
• You may not have set the printer as default
• Multiple printer connections with a single device may also be the reason
• If you have given multiple commands at a time, then it shows some errors
• Virus or malware attack may cause the error

Easy fixes of Dell print spooler in Windows 10:

Now you are aware of the probable reason behind the error and to get fixed you need to be sure what causes your printer to misbehave. Here are some proven solutions that you can follow to fix your printer:

Method 1. Configure print spooler

• Press “Windows+R” button in a keyboard that will open a search box
• Type “Services.MSC” and search
• You will find the items list where you need to find the “startup type” option
• Once you select this option click on “Automatic.”
• Now press the “Apply” button and then “Ok.”
• Now you can restart your computer to save the changes

Method 2. Edit the registry on the system

• In your keyboard press “Winodws+R.”
• In the opened search box type “Regedit” and press enter
• You will get a list of items where you need to navigate “HKEY_LOCAL_MACHINE.”
• Once you get this option open it
• Select “System” and click on the option “Current control set.”
• Now go the “Services” option
• Choose “Spooler” option and then “DependOnservice” value
• A value data box will open where you have to select “RPCSS with Http.”
• Remove the Http part and press “OK.”
• Now you can restart your computer to set the changes

These methods are proven the solution, and once you perform this exercise, you can remove your issue. However, in case of further issues, you can contact at dell customer care and get the perfect and easy solutions.

Read More:- Dell Phone number

Source URL: Dell Print spooler in Windows 10

Dell printer is one of the most useful devices in recent times to process all your printing requirements in such an easy manner. Now if you have brought a new Dell printer device you need to know about the easy steps to install and set up to start optimizing your work with efficiency. The process of installation and setup is quite an easy task that you can simply follow. In any case, if you require an expert you should call at dell technical support number and access a complete support system. Also, this article will tell about all the steps for installation and setup.

The prior requirement for Dell printer set up:

Before you initiate the process you need these things for easy set up a Dell printer:

·  A computer or laptop

·  Wireless connection

·  Power connection

How configure Dell printer?

Once you fulfill all the requirements you can easily install your printer and connect it to your computer. Now follow these steps to accomplish the process;

·  First, unbox your Dell printer carefully

·  Connect it with power connection and turn your printer on

·  Now using the USB cable you easily connect your printer to the computer

How to set up a Dell printer using the CD?

You need to have a compact disk that has the printer driver. Usually, it comes along with your computer and you get when you buy a new computer. Now you have the insert that CD into your computer to install the driver. In case you can’t get the CD then you can download the printer driver from the official website of Dell as mentioned below:

·  Go to the official website of Dell and download the printer driver

·  Then run the downloaded file

·  Once the process is complete you need to select the language

·  Then accept the agreement and license

·  A tab will open asking you connection type method

·  You can choose the option USB cable or WiFi

·  If you select USB cable you will be asked to connect your printer to the computer using the USB cable

·  Once you connect the printer and computer the process of installation will start and within minutes the process will complete.

·  Now you can make a test print to check whether it has set up correctly.

By following these steps you can easily set up your printer with your computer and start printing your documents. Also if you get an issue regarding installation or set up you can contact at dell customer care for further help.

Read More:- Dell Support Number

Source URL: Install Dell Printer Setup