部落格

Almost every office in the world uses printers and printing paper for daily work. While it is true that printers have helped to boost productivity in the workplace, unfortunately, the use of printers has a negative impact on the environment. Studies suggest that close to 80 million ink cartridges are discarded every year, and these cartridges may take at least 400 years to break down. The chemicals in ink cartridges, such as petroleum oil and non-biodegradable plastic casing, cause soil and water pollution. Considering the environmental impact of using printers, HP, which is one of the biggest names in the printing world, has taken several steps to promote a culture of environmental responsibility. This blog will give you an overview of the initiatives undertaken by HP to encourage eco-friendly printing for a forest positive future. You can also call the hp printer customer care number to find out how you can use your printer in an eco-friendly manner.

Steps taken by HP to encourage eco-friendly printing

HP took an innovative and bold pledge to ensure every page that is printed is forest positive and carbon neutral. Here are some highlights of the eco-friendly vision adopted by HP when it comes to print sustainability:

·        The company successfully completed its goal of 100% zero-deforestation with HP-branded paper. The goal was reached two years ahead of schedule.

·        Customers using HP Printers reported a 33% annual reduction in carbon emissions, energy consumption, and cost, thanks to HP’s Managed Print Services.

·        HP Printers use closed-loop recycled plastics, while specific products have up to 30% closed-loop, post-consumer plastics.

·        New HP Products, like the energy-efficient HPLaserJet A4 printer, come with lower melt temperatures that help to reduce energy consumption significantly.

·        HP has plans to shift to renewable, carbon-neutral energy in order to reduce greenhouse gas emissions during operations.

·        HP recycles plastic from old HP cartridges to create new ink cartridges, thus reducing the amount of disposable plastic waste.

·        As part of its circular economy initiative, HP sourced around 550,000 pounds of ocean-bound plastic, which was later used to manufacture new products.

·        The research and development teams over at HP work to create state-of-the-art toner and ink cartridges made from recycled content.

When it comes to environmental responsibility, HP certainly leads by example. HP is on a path to improve the future of printing and the future of the environment as well. If you want to learn how you can contribute to the eco-friendly initiatives put forth by HP, you can call the hp printer tech support and ask for additional information. Printer technicians and software experts will be able to give you helpful tips so that you can use your HP Printer in a more efficient and environmentally friendly manner.

Read more:  hp printer support 

Source URL:  HP encourages eco-friendly printing 

Imagine your disappointment when you are at work, trying to take a print out of an important report, but the HP Printer you are using keeps printing double vision. From outdated printer firmware to defective ink cartridges, there could be several reasons why this error occurred on your HP Printer. Printing errors, like the HP Printer printing double vision, can be quite frustrating because they can halt your printing tasks and affect your productivity. If these errors occur, you should call the HP Printer Customer Support Number and consult a trained printer expert to identify the root cause of the problem and find out how to resolve it. You can also go through the solutions mentioned below and try and fix the double vision error on your own.

·        Solution 1. Check your HP Printer Settings: The print settings on your HP Printer play a key role in making sure the printer functions efficiently. You can use the HP solution center software application to make changes to your HP Printer settings. Open the print settings and check if the print size, the print resolution, color, and other specifications are compatible with the paper dimensions you are using.

·        Solution 2. Update the HP Printer firmware: HP will often update the printer firmware to include product enhancements or to fix bugs in the previous versions of the firmware. You should visit the HP Customer Support: Software and Driver Downloads page to update the firmware to make sure you are using the latest version. 

·        Solution 3. Recalibrate the print-head: All HP Printers have a calibration function that helps to make sure the cartridge ink falls in the correct place on the printing paper. It is possible that the double vision printing error occurred because the print head is not calibrated properly. Go to the toolbar on your HP printer software and use the calibration to align the text and then print a sample page to see if the error is resolved.

·        Solution 4: Replace the ink cartridges: If you find that the double vision printing error persists even after you recalibrate the print-head and paper advance, you should consider replacing the ink cartridges on your printer. HP recommends all users to utilize genuine HP ink cartridges for the printer since it is not possible to attest the quality of non-HP cartridges.

·        Solution 5: Reset the HP Printer: Another solution to fix the double vision error on your HP Printer is to reset the printer and restore the factory set-defaults. Resetting the HP Printer will restore the settings to the factory default, however, it will not affect the page count or the language settings of the printer.

If you have any questions about the solutions mentioned above, or if you find that the double vision printing error persists even after implementing the solutions you can call the HP Printer Technical Support and ask for additional technical assistance. Experienced HP technicians are available 24 hours a day and will be able to give you the best solution to resolve any error you may encounter while using your HP Printer.

Read more: HP printer support Number

Source URL: HP Printer printing double vision

There is a chip that is present in every HP color cartridge which works primarily for communicating with the printer. It is because of this chip that it becomes necessary that you reset the cartridges after refilling or replacing them. This chip helps in indicating the message of low in the cartridges. It has been seen that the error message of low ink would be displayed even after replacing the cartridges and this is where it becomes crucial that you reset them. When you manually reset the ink cartridges, it would save a lot of time and money. You would also be saved from encountering the unnecessary warning of low ink. You can understand this issue ideally by going through this blog. The users also have the option of promptly connecting with HP Printer Technical Support Number to avail assistance regarding this issue. 

Steps to reset HP cartridges 57, 28 and 22 are as stated below:

•After you have successfully refilled or replaced the cartridges, take a look at the bottom of the cartridge. You would be able to find six copper contact strips at the bottom.

•Make sure that you keep the cartridge in front of you in such a manner that you can see the copper strips facing you.

•Now put a piece of tape on the top of the contact in the second column.

•After you have placed the tape, put the cartridge back into the printer. If you face an error message ignore it and then print a test page.

•Now remove the cartridge from the printer and keep the tape on it. Further place another tape on the top of the contact which is in the sixth row.

•You would now again have to place the cartridge in the printer and print a test page ignoring the error message.

•Finally, remove the cartridge again and take off all the tape that you had put on the contacts.

•Now when you replace the cartridge in the printer, you would be able to see that the ink level is displayed as full.

Opt for cycling the Cartridges

•You can take up this option if the first option does not work for you. In this process, you would require extra color cartridges.

•Now place the refilled cartridge in the printer while ignoring the error message that is being displayed.

•Take the refilled cartridge out and then replace it with the spare cartridge. Ignore the error message that you would receive and choose to print an alignment page.

•Once you are done with this step, remove the second cartridge and replace it with the other spare cartridge that you have.

•Again opt to print an alignment page.

•Once you have done all the said steps, remove and replace all the spare cartridges with the refilled cartridges. After you have done this step, you would be able to see that your ink levels are now shown to be full.

If you feel you would require more assistance while putting these steps into action, then you can choose to connect with the HP printer Phone Number. They would provide you with all the required assistance in this aspect. 

Read more:  HP Printer Customer Care 

Source URL:   How to reset an HP color Cartridge

If you have started to encounter your HP PC having issues while rebooting then this could be because your BIOS system has stopped working. It is also possible that your BIOS has been corrupted or there has been some issue of the virus on your system. BIOS is an essential aspect of the system, without the BIOS you would not be able to boot into the operating system and then your system would display a BIOS issue. When you encounter this issue you would be shown a black screen or you might only hear a beep and you would not be able to access the operating system. There are several emergency tools which can help the users resolve this issue automatically. The users can also connect with the HP Printer Tech Support Number. They would have all the accurate information on how to solve the issue that you have come across. You also take up the steps that have been stated below:

The steps to recover the BIOS on your HP PC

The steps that you would need to undertake in order to accurately solve the issue is as stated below:

·       The first thing that you would have to do is to turn off your system.

·       After your system is turned off, you would have to press the window key and B key simultaneously.

·       Now, while pressing these said keys, you would have to press the power button to get into the BIOS screen. You would have to keep the button pressed for 2-3 seconds until the screen is displayed. It usually comes up after 8 beeps.

·       After this, the LED light would remain on and the update would start automatically. If you see the update screen, you would have to follow the steps that are given to you or you have the option of waiting for it to appear.

·       Once you find that the process is complete, you would have to click on ‘Continue Startup’ after which the system would immediately start up.

·       Once the system restarts, you would get the message that the update has been completed and you would have to press ‘Enter’ in order to continue.

·       Further, you would have to follow the instructions that are given to you on the screen. This would enable you to access the PC properly.

If the users accurately follow the information that has been given above, they would efficiently be able to handle the issue that they have encountered. In such a situation the users can also take aid from the HP Printer Customer Care. They can easily connect with this customer service and acquire assistance on how to overcome this issue. The executives at this service are highly trained and professional. The users can connect with them at any hour of the day. Moreover acquiring this service would not inculcate any charge on the users. The executive would analyze the issue in detail and provide you with the best alternative that is possible. They would ensure that you do not come across this issue again.

Read More: HP printer Phone Number

Source URL: Recover the BIOS of HP Pavilion 20-a200

With the passage of time overheating problem in HP Laptop become most common. And if you don’t take this issue seriously then there might be some other problems too such as continuous crashing of Windows, loss of data and blue screen of death errors and so on. Being an HP normal users you might not know that these issues are occurring because of overheating issue of your HP laptops and till the time you get to know this may be your motherboard gets fried. Your best chance to not let the overheating problem hamper your work can be when you take the assistance of the experts. And experts can be found by dialing HP Printer Technical Support Number which remainsaccessible at all hours in a day.

How can you know that your HP Laptop is Overheating?

If the back side of your laptop is hot then it does not mean that your HP Laptop is overheating. When the fan of your laptop is running in great speed or when you are able to hear the loud noise of your laptop fans then one can say that their HP laptop is overheating.

What is the reason for the overheating of HP Laptops?

The answer to this question can be very simple that is insufficient cooling but some major reasons can be:

·        Lots of dust have been clogged up on your laptop fans

·        Degenerated thermal grease can be found between the heat sink and CPU of your HP laptops

How to fix the overheating issue of HP Laptops?

The very common solution which every user can do when they first notice that their HP Laptop is overheating is to clean the dust which has clogged up on your laptop fan. As these fans are known for maintaining cooling between CPU and graphics card. The steps which must be followed to remove the dust from the fan are given below:

·        Remove the battery after turning off your HP Laptop

·        Unplug all the power cable also

·        Using the cotton dipped into the drop of alcohol clean the fan carefully. Before turning on the laptop make sure alcohol is evaporated

·        You can use vacuum cleaner too to remove the dirt and dust of your fan

·        One can clean the dust by sucking out the hot air of their laptop by using the vacuum cleaner

Even after executing these troubleshooting steps you are not able to fix the overheating problem of your HP laptop then it is advisable to contact the professionals by dialing the HP Printer Customer Support which remainsaccessible at all hours. The experts are well versed in fixing all the issue that isassociated with HP laptops.

Read more: HP printer helpline number

Source URL:Diagnose and fix an overheating HP Laptop

HP printer is one of the best and most abundantly sold printers in the market. They are known for their high performance and HD print quality with high graphics print. It is a very reliable brand of printers and it can be found in almost every household and office around the globe. But these printers also give unnecessary and unwanted headaches to the customers. One of the most prominent problems that are caused by HP printers is the inability to connect to a computer or the inability to maintain a connection with the PC. Customers of HP printers complain a lot about their HP printer not connecting to the computer. However little this issue may sound to be, you should fix the problem right away as it will prohibit your using of the printer and will eventually delay your work. So if you want to know how to solve this issue you can contact HP Printer Customer Service Number & you take this blog as a reference.

There are certain things you need to do if you want to solve this problem with your HP computer. And the steps that you can take have been explained on the points given below.

Method 1.

ØYou need to make sure that your computer and printer are both connected to the same wireless network or else the printer won’t connect.

ØExamine whether this is the case by disconnecting the USB and Ethernet cables from the printer.

ØThen go to the ‘control panel’ and under ‘programs and feature’ click the printer option.

ØClick on the wireless set up menu and check whether the printer is connected to the computer.

ØIf you find that it is not, launch the setup wizard and follow the routine steps to finish the task.

ØComplete the process by clicking the ‘done’ button after you have completed it.

Method 2.

You can also conduct a basic troubleshooting task by restarting the printer, computer, and router. This simple reboot is known to fix issues like this.

Method 3.

If the above two methods fail to deliver results, you can always update the firmware and driver. Since the driver is responsible for maintaining a connection between the two devices you must make sure that it is updated all the time.

These are some of the steps you can take to resolve the connection issue with your HP printer. If it still fails to deliver, you can always talk to the representatives at HP Printer Technical Support to avail their assistance.

Read more: HP Printer Helpline Number

Source URL:HP Printer not connecting to the computer

Wi-Fi connectivity problems in printers are very common and it happens occasionally. It isn’t an alarming problem but it would be wise to fix this issues immediately if you ever come across it. This is a very prominent problem in HP printers and it can be resolved if the proper steps are taken. Usually, it gets fixed after restarting the printer, router, and computer. But in some cases, you are required to carry out more steps or methods to tackle the problem. If you are interested in knowing what you can do to handle this problem correctly, you can continue reading this blog. You can also get the information and help you need by contacting HP Printer Customer Service Number and talking to the certified professional remotely.

There are three ways to handle this problem if you ever come across it. The first is to restart all the three corresponding devices. The second is to disable the antivirus and the firewall and the last method is to check for hardware problems. This blog will guide you step by step to help you get rid of the Wi-Fi problem with your HP printer.

Method 1: restart your computer, printer and the router.

This is one of the most basic troubleshooting step or method you will find to resolve this problem.

ØCarry out the steps respectively. First, you must restart the computer.

ØThen unplug the power cords from the printer and turn it off. Wait for half a minute and turn it on and plugging in the disconnected cords.

ØNow move on to the router. Unplug the cords and like the rest, wait for some few seconds and plug it back on.

Method 2: disabling the antivirus/ firewall.

The presence of an antivirus or a firewall can lead to connectivity issues with the printer. This is because this protection software may restrict the connection of the printer to the PC. Hence disabling it till the time you are done with your print work is advised.

Method 3: Problem with the hardware.

Check your computer and printer for any hardware problems because this may result in connectivity issues with the Wi-Fi. Run a hardware diagnostics on your computer to pinpoint the root cause of the hardware problem.

These are some vital steps or check-ups you can perform to resolve Wi-Fi problems on your HP printer. If you can still see traces of the problem, you can talk to the supervisors at HP Printer Technical Support to get customized help from certified employees.

Read more: HP Printer Contact Number

Source URL:How to Fix HP Printer Wi-Fi not working

HP Printer is a world famous when it comes to printing work. This machine is well-known for the printer, computer, and other similar products. There are millions of users of HP Printer available in the world. You can use an HP printer to use in your personal or professional life. In need of printing important documents, HP printer will give you a very good quality printing service. Every version of this device comes with latest and advanced technology. So with every update, it gets more enhanced. But this advance technology becomes a minus point when the user face problem while installing the device on your computer. The installation process is not so tough but sometimes new users face difficulties when installing the HP Printer on the computer. If you are also an HP printer user, then you can read this blog to know the suitable installation steps or you can ask experts on the HP Printer Customer Support Number.

Steps to install HP Printer

To install the HP Printer on your computer follow these steps:

1.     Click on the start menu, then navigate to the settings.

2.     Then choose to change the PC settings from the Settings options.

3.     Then choose the option ‘PC and devices’ and after that click on ‘Devices’.

4.     If your HP printer is installed in the computer, then it will show under printers section.

5.     But if you see that the HP Printer is not installed on the computer. Then click on the tab ‘Add New’.

6.     Initiate the search and select your HP Printer name in the search result.

7.     Then click on ‘Add’.

After Adding your HP printer on the computer, make sure that the printer drivers installed on the computer are updated. If you are not using the latest printer drivers, then it can cause the ‘compatibility error’. So, to be safe from this problem install the latest printer drivers from the official website of HP printer.

After the installation of the printer on your computer, once check printer is working ok or not by giving a printing command. If you are able to print then do your work. But if you are getting any problem, then contact on HP Printer Technical Support. Talk to experts on this number and share your problem with them. They will listen to your whole problem, then give you the best possible solution.

Read more:   HP Printer Contact Number

Source URL: How to Install HP Printer on the computer

AirPrint is a feature found in Apple devices that lets you print without the need of a driver. It enables Apple device users to print good quality pictures or documents from their Mac, iPhone, iPad etc. This technology is usually inbuilt with a lot of printer models and among these printer brands, HP is one of them. This feature makes it very convenient for Apple users as they do not have to go through the task of downloading and installing printer drivers in their system. The benefit of this feature is immeasurable but the setup and configuring process is painstakingly lengthy. However, if you know how to perform basic set up and configuring task, then it won’t be a problem for you. But then there are thousands who are constantly looking for help and support. So if you came here looking for instructions on how to set up and configure AirPrint on an HP Printer then you are in luck. By proceeding with this blog you will find the steps that are taken to complete this task. But if you are looking for assistance from experts, you can call HP Printer Customer Care Number. 

Before you continue, make sure that your printer and your Apple device is compatible with AirPrint to avoid any complication. If you are using a Mac computer, it should be running on Mac OS X 10.7 or higher and if you are using an iPhone, iPad or iPod, it should have an iOS of 4.2 or newer. Now proceed by following the steps below:

• First of all, you need to connect the Apple device to the corresponding wireless network as the printer.
• Now download the latest printer firmware on the computer. You can download it by going to the official HP support site.
• It is optional, but if you want to change the name of the printer’s AirPrint, you can do that as well to avoid confusion.
• Now, configure the AirPrint on your computer by going to the control panel and selecting the ‘wireless’ menu and click on ‘wireless direct’. Put the setting on ‘default’.
• Click the button that looks like an Apple and choose ‘system preferences’. And under that select ‘print and scan’.
• Now click on the plus sign icon located at the bottom and under ‘nearby printers’ choose your printer’s name.
• Now click on ‘print using’ and select ‘AirPrint’ and finally, click on ‘add’.

If you have followed the steps exactly without missing out on any single one, then you would have successfully set up and configured AirPrint to your computer. However, if you are stuck somewhere and you require technical help, then call HP Printer Customer Service.

Network drivers are an essential part of the computer as it enables the computer to have a connection with any network. It is like the bridge between the device software programs and the hardware. Through this connection it allows the PC operating system to access and control the hardware as required by the software programs. Without network drivers there will be a problem regarding the relay of commands from the computer to the hardware and the external hardware devices will not be able to execute these commands at all. And sometimes these network drivers fail to recognize the printer in the system. This is a very prevalent issue with HP printers and it has been made aware by the customers that they are in need of basic troubleshooting steps and measures to deal with this problem if you want to know more about the issues faced by HP printers, you can call HP Printer Technical Support.

The issue with the driver failing to recognize or find HP printers in the system is a very common issue with HP printers. And this issue can be handled by uninstalling and reinstalling the HP driver and software. And the steps have been explained in the steps below:

• Disconnect the printer and go to ‘control panel’.
• Click on ‘programs and features’ and select your printer name and click the ‘uninstall’ button.
• After uninstalling the program, you need to restart your computer.
• Now, turn on the printer and disconnect the USB cable and go to HP customer support- software and driver downloads.
• Click on ‘printer’ type in your printer’s name and model number and hit the ‘submit’ button.
• Make necessary changes to the operating system and click on the ‘change’ button,
• Under ‘driver’ click on the ‘download’ button if you want the full software version or the ‘basic drivers’ for other driver option.

This is an effective way to solve the print driver issue in HP printers. If you have any doubts or if you come across any additional complication while executing these steps, you can contact HP Printer Technical Support Number.

Source URL: HP printer not found during the network driver setup