部落格

Brother Printers have now incorporated the feature of wireless connectivity and it has taken the printing expedition to a new level. The users are now not required to connect the printer to the operating system via USB cable and can now use wireless printing techniques. Whenever a person purchases a printer, it is always expected to get the best result possible. Now coming to the Brother Printer error code TS-02, it is an indication that the access point of the router or WLAN to which your printer has been connected is causing some troubles while authenticating itself with the MAC address. In simple terms, it means that the access point or the Wi-Fi router cannot be located by the system. It usually occurs when you are trying to install or connect the printer in the operating system. There can also be other small issues behind the error which will be discussed later on. You can keep on reading further or can directly engage yourself with the Brother Printer  phone number and get the error resolved through their remote service.

Some other reasons behind the error code TS-02

ôThe printer has not been installed properly in the system

ôAny corrupt hardware which was detected was not deleted completely from the system.

ôAny presence or entry of corrupt system files.

ôThe files in the Windows system was damaged

It is always advised to look for the actual cause behind the error and then apply the troubleshooting method in order to save your time and effort.

How to fix the Brother Printer error TS-02?

Step 1- The first thing that you are required to do is whether the Wi-Fi router to which your printer and system are connected is switched on.

Step 2-Now with the help of an Ethernet cable or built-in wireless LAN, you need to connect the printer to the internet connection and make sure that the access point of the WLAN works properly.

Step 3-Now either bring the printer close to the router so as to avoid any net connectivity barrier and issues.

Step 4-Now the printer kept within the range of 1 meter or 3.3 feet from the router, you are required to ‘RUN’ the printer’s temporary location.

Step 5-See that your Brother Printer is using the radio signals within the range of 4 GHz. If it will be within 5 GHz range, then this error will be displayed on the device.

Step 6-If the router is asking for MAC address filtering, then ensure that the Brother printer has allowed the filter.

Step 7-The range can be adjusted by going to the Control panel and then to Setup Wizard. One can also do it manually by providing the SSID and security information.

Step 8-After the procedure has been completed, you can restart the printer to see if the error has been fixed.

This can be a complex process for those who acquire very less technical knowledge. In that case, it is suggested that you contact the Brother Printer  support phone number and take the professional help.

Source URL: How to Troubleshoot Brother Printer error TS 02

Despite being the brand which provides the users with highly effective as well as efficient printers there are times when their devices come across glitches which tend to irritate the users. One such issue is when the Brother Printer goes offline. In such a situation the users are not able to work on his/her print jobs. One thing that the users must understand is that there are two kinds of printers that users can use. One is the wired printer whereas the other is the wireless printer. So the process of solving the connectivity issue with these different types of printer would be different. Apart from the other reason for this issue could be a printer driver issue.

While using either type of the printer, if the device is not connected properly to your system you could then encounter the Printer going offline issue. On the other hand, if the printer driver which is installed in your system is outdated, this could also cause the issue. Users can always connect with the Brother Printer  phone number to know more about this problem that they might be facing.

Effective solutions for the problem of Brother Printer Offline

The steps that you can undertake to solve this problem has been stated below:

Step 1: Check the power source

If you see that there is no response on the printer’s screen, this might be because of a power failure. You would then have to check the power socket that your printer is plugged into. Check whether the device is receiving enough power to function properly.

Step 2: Check all the connections

Once you have checked the power source, you would then have to check for any connectivity issue. If you are using a wired printer, then check the USB connection of the printer and the PC. Make sure that all the cables that you are using to connect are in good shape and condition. If you are using a wireless printer, double check if the IP address is correct or not.

Step 3: Set Brother Printer as your Default Printer

It would be ideal for you to set Brother Printer as your default printer. If you have more than one printer, then it could arise authentication issues. The process to set brother printer as your default printer is as given below:

·        Navigate to the control panel and the access the ‘Device and Printer’ option which can be found under the option of ‘Hardware and Sound’.

·        You would then have to delete all the printer jobs from the list and then set the Brother Printer as Default. You must keep in mind that before you set the printer as your default you would have to stop all the running process of the printer.

If you accurately follow the given steps, you would effectively be able to solve the issue of your Brother Printer being offline. If you face any discomfort while following the steps that have been given, then you can efficiently connect with the Brother Printer  support phone number and avail the professional assistance that they would provide you.

Source URL: Resolve Brother Printer Offline Issues

If you want to install Brother Printer driver in Macintosh operating system then the very first thing which you need to check is the system requirement. Some of the brother printer users get stuck while installing the driver as they witness fatal error. If you are one of those few users who have witness such kind of error then you need to call Brother Printer  Technical support where qualified technicians will answer your call and will guide in resolving the issue completely.

How to install the Brother Printer driver?

If you are not aware of Brother Printer and how to use this printer, then this blog will help you in understanding it.  One of the incredible brands that are conveying best in class service is Brother Printer. This printer comes in shapes and sizes and even have different model each with different features. This brand printer is consistent in what they print and they work. So if you have purchased Brother Printer and want to install it on your Mac OS then just follow the below mentioned steps:

·        Open the official website of Brother printer on your Mac system

·        Enter the model number of your printer

·        And look for the latest version of Brother Printer Driver and make sure that you know the correct architecture of your system whether it is 32 bit or 64 bit.

·        Download the printer driver by clicking on the link.

·        Save the setup of Brother Printer driver in the location of your choice

·        And once the download is complete, double click on the file to run it as Administrator

·        You need to follow the instruction that is appearing on your computer screen and must read all the terms and conditions before agreeing.

·        After the installation of the printer is complete you need to click on the finish button

·        Don’t forget to take the test print which will depict whether your Brother Printer is properly installed or not.

If the test print is printed then you have successfully installed the Brother printer driver on your Mac system and if the test print does not come out then there might be some issues which may have arisen while performing the steps. If you want to resolve the installation error then you need to reach out toBrother Printer Customer Care Numberwhich stays accessible throughout the day in a year.  The team of experts is known to have years of experience in solving issues related with Brother Printer be it installation error, unable to update the driver and etc.

Source URL:  Brother Printer support Phone Number

Brother printers are range of printers that have a number of features. Their amazing functions include wireless printing, scanning, and fax. The new range of multi-functional Brother printers can be a great addition to your home or business because they make will make your work very easy. It is a good idea to get as much information as possible so as to avoid future set up and installation errors in Brother Printers. So if you have a new printer and are looking to get started look no further.

Brother Printer  customer care

Steps to set up and install Brother Printer

It is important to connect the printer properly so that you can avoid any problems in the future and so that your work will not suffer. You can go through the user manual and follow the steps given below to make sure you install Brother Printer properly:

Step-1 Go to the desktop and create a new folder. You can name the new folder “Brother"

Step-2 Downloading the printer driver

·        Type the following address in the address bar to download the printer driver: support.brother.com

·        Select your Region > Country > Language > Model

·        Click on the downloads after checking the OS

·        After reading the license agreement carefully click on the option ‘I accept’

·        Once the file in downloaded save it in the ‘Brother’ folder you created on the desktop earlier

Step-3 Decompress the downloaded printer driver

·        Open the Brother folder on your desktop and double click the setup file. 

·        If you see "Open File -Security Window", click Run, if not, continue.

·        Go to the WinZip Self extractor click search for the Brother folder.

·        When you are at the WinZip Self Extractor window select ‘Unzip’.

·        If the confirmation window opens click ‘Ok’ and close WinZip Self Extractor.

·        Depending on which language you selected the system will generate a folder. For example, if you selected English you will see a folder named “English”.

Step-4 Install the printer driver

·        Connect all power cords in their respective places and then follow the steps to install the driver software.

·        You will be asked to select the language of your choice and then after choosing your preferred language, the installation process will be complete.

If you are not clear on how to complete the steps mentioned above or if you would like any additional information about the installation of your printer you can get in touch with a customer relations person. Customer satisfaction is of key importance when it comes to anyone who uses Brother Printers. Even a small set up or installation error can stall your work. That is why the Brother Printer  tech support number

 is active 24*7 to address all your queries. A team of well-trained technical personnel will be happy to help you resolve any printer installation error as fast as possible.

Source URL: Brother Printer support