This
blog will help you provide with all kinds of necessary requirements and
instructions that are needed for Verizon FiOS self-installation. But before you
begin the process, you will be required to disconnect all existing TV equipment
that is available in your home. The items
that you will need for the installation process are FiOS router and power cord,
cables and connectors, the router model which you had received and digital
adaptor and a cable card. You can read the step by step instructions for the
self-installation process. Since this is a bit of a complex process, so it is
advised that you take the help of Verizon Customer Care whenever
the need arises.
Step 1- Setting up the FiOS Router
·
Connect the Coax
cable to the FiOS router to a power plug.
·
If you are using
the Wired Internet setup, then connect the Ethernet cable from the router to
the computer.
·
The light will
turn on and will be white once activated. This process will take up to 5-6
minutes.
·
If you have a
wireless router, then look for the Wi-Fi label under the Wireless network name
and Wireless password.
·
Select the
network name and password when prompted for connection.
Step 2- Configuring the video media
server setup
It
is recommended that this server setup is configured to your house main
television.
·
Connect the coax
cable to the video media server.
·
Then connect the
HDMI cable to your television port.
·
And after that
connect the power cord from the video media server to the power supply.
·
Now switch on
the video media server and then the TV. Now follow the instructions as guided
on the television using the FiOS remote.
Step 3- Doing the media client
setup
It
is a step which is preferred and needs to be done with HDMI cable.
·
Firstly, connect
the coax cable to the media client.
·
Now connect the
HDMI cable to the television.
·
Lastly,connect the power cord
to the main supply.
·
Firstly make sure
that the media server setup has been installed, then move to this step.
Step 4- Digital adaptor and cable
card setup
·
Follow the same
steps for connecting the digital adaptor to your television.
·
To activate it,
switch on the button on the digital adaptor by pressing the set-top box button on the remote control.
·
Switch on the
television and with the help of FiOS remote, tune in to channel 3.
For
installing the cable card and configuring its setup, get in touch with the Verizon Tech Support Number and
reach out for their help. The experts will assist you in the process making
sure that the self-installation process is complete.
Read
More -
Source
URL: Verizon
FiOS Self-Installation
The Wall